spicy_guy
11-07 01:16 PM
Count me in...
My tickets / travel (Nov 18th) is at the brink of cancellation.
RD: 9/2. I raised SR to expedite. Not sure if they accept it.
Contacted congressman and sent them documents.
Need to contact Ombudsman.
Any inputs guys?
My tickets / travel (Nov 18th) is at the brink of cancellation.
RD: 9/2. I raised SR to expedite. Not sure if they accept it.
Contacted congressman and sent them documents.
Need to contact Ombudsman.
Any inputs guys?
wallpaper Fullmetal Alchemist - For the
rajakannan
06-28 10:19 AM
Atleast let's all unite now and file properly ! It seems more imminent that uscis will stop accepting applications. Just rushing and filing will not solve the problem, Read below ,
Source: http://www.immigration-law.com/
06/27/2007: SPECIAL ALERT: I-485 Cap for FY 2007 Can Be Exhausted Before End of July? Then What Will Happen?
According to the AILA, approximately 40,000 visas remain in all employment-based categories, other than EW, for FY2007, according to its sources, and that the USCIS has far more than 40,000 adjustment applications in the backlog queue that are ready for approval, not to mention the additional numbers which will be consumed in concular immigrant visa processing. It is thus possible that the cap may reach within a short period in July, even though no one can predict it until after July 2, 2007. The USCIS at this time does not have any policy announced with reference to July 2007 I-485 filings which are filed after certain date in July when the total number is exhausted. However, considering the fact that the USCIS currently rejects the "Other Worker" category I-485 applications even though June 2007 Visa Bulletin show current for certain applicants because the "other worker" category quota was exhausted on June 5, 2007. This raises a serious concern because as we reported earlier today, the USCIS appears to be picking up the speed of processing of backlog I-485 applications in anticipation of flood of July 485 applications. The USCIS hands may be tied, should the EB visa numbers for FY 2007 is exhausted before the end of July.
The situation is particularly critical because of the USCIS decision not to accept the I-485 filings without the medical report. AILA demanded leniency but the USCIS reportely refused to accept such demand. Since medical report is "initial evidence" to I-485 filing, under the recent rule change, any I-485 filing with the medical report can be rejected or denied. Reports indicate that there are a huge backlog in scheduling medical examination in most of the areas in the country.
Source: http://www.immigration-law.com/
06/27/2007: SPECIAL ALERT: I-485 Cap for FY 2007 Can Be Exhausted Before End of July? Then What Will Happen?
According to the AILA, approximately 40,000 visas remain in all employment-based categories, other than EW, for FY2007, according to its sources, and that the USCIS has far more than 40,000 adjustment applications in the backlog queue that are ready for approval, not to mention the additional numbers which will be consumed in concular immigrant visa processing. It is thus possible that the cap may reach within a short period in July, even though no one can predict it until after July 2, 2007. The USCIS at this time does not have any policy announced with reference to July 2007 I-485 filings which are filed after certain date in July when the total number is exhausted. However, considering the fact that the USCIS currently rejects the "Other Worker" category I-485 applications even though June 2007 Visa Bulletin show current for certain applicants because the "other worker" category quota was exhausted on June 5, 2007. This raises a serious concern because as we reported earlier today, the USCIS appears to be picking up the speed of processing of backlog I-485 applications in anticipation of flood of July 485 applications. The USCIS hands may be tied, should the EB visa numbers for FY 2007 is exhausted before the end of July.
The situation is particularly critical because of the USCIS decision not to accept the I-485 filings without the medical report. AILA demanded leniency but the USCIS reportely refused to accept such demand. Since medical report is "initial evidence" to I-485 filing, under the recent rule change, any I-485 filing with the medical report can be rejected or denied. Reports indicate that there are a huge backlog in scheduling medical examination in most of the areas in the country.
_480x360.jpg "Another Full Metal Alchemist")
coloniel60
08-15 02:59 PM
Duplicate application will definitely create problems I will told today by the USCIS rep. They don't recommend it at all and neither my lawyer. He has refused to re-file or will only re-file if I take the onus/responsibility of the result.
USCIS rep also informed me that as long as you have a tracking proof that you application was delivered, you should be able to refile after Aug17 also, in case application was not processed because it was lost or so.
USCIS feeds us lot of BS. Their reps have no idea about the whole immigration process. You get different answers each time you call. Atleast 3 different reps told me that it's fine to refile except that I will lose the money and one rep told me that I can always request USCIS to refund my money. Go figure.
USCIS rep also informed me that as long as you have a tracking proof that you application was delivered, you should be able to refile after Aug17 also, in case application was not processed because it was lost or so.
USCIS feeds us lot of BS. Their reps have no idea about the whole immigration process. You get different answers each time you call. Atleast 3 different reps told me that it's fine to refile except that I will lose the money and one rep told me that I can always request USCIS to refund my money. Go figure.
2011 Fullmetal Alchemist
ksefiane
01-22 01:01 PM
I have contacted local lawmakers and was told that one office is sending a letter to the White House. However, I was not able to get a copy of the letter so I am not sure if that will really happen. I have asked my employer to send a letter as well. I have sent a letter to IV and White House today and have sent out a template to all friends and family in hopes that several of them will send in letters on my behalf. I know of three people that have done it thus far.
Thanks!
Morokko
Thanks!
Morokko
more...
LostInGCProcess
10-29 09:40 AM
So much for so called "highly skilled". Young guys out there, in their 20s....think twice about making America your permanent home. Right now, it is very discouraging.
It is sad. When you call USCIS to get some information, its almost like we are hitting against an Iron wall. They dont give out any information except read from a standard text. They could as well have some automated machine to read those out.
I just want to know if there is an official explanation for the delay in EAD renewal from USCIS. Wonder why it takes that long when they already have all our 'janamkundli' with them.
It is sad. When you call USCIS to get some information, its almost like we are hitting against an Iron wall. They dont give out any information except read from a standard text. They could as well have some automated machine to read those out.
I just want to know if there is an official explanation for the delay in EAD renewal from USCIS. Wonder why it takes that long when they already have all our 'janamkundli' with them.
andy garcia
02-01 03:17 PM
OK, they'll raise the fees (I can live with that). But how do we improve the chances of better services?
USCIS is asking for comments....If IV would be so kind as to submit comments for the raising of the fees. I humbly throw these out for discussion:
Accept the fee increases providing:
1) That USCIS propose public standards of reducing processing times to 30 days+10 day security check.. Automatically produce an EAD if it takes longer. Hey. We're all still in the country whether the process succeeds or not right? We would just appeal, submit more info or beat it until it's done. Who's any safer?
2) That RFEs not be used to manage work levels. Plus they ought not to reset the 90 day clock to zero if they issue one. That is ridiculous and unheard of.
3) That they simplifiy applications (a la Canada) so that "lay persons" can (carefully) fill in the forms. Lawyers not required.
4) That the USCIS abide by the laws. Especially regarding FBI name checking. We have a duty to follow the law. I'm careful to do so. The government should be careful to do so as well.. Call me a radical.
5) That they publish proposals to stream line the process with modern business methods and concrete goals. The increases should be tied to fulfilling stated goals of improvements of service. Otherwise they roll back. Have a 3rd (independent) party decide if the goals have been met in three years.
If we tax payers are giving them extraordinary increases in fees, we should at least expect some meaningful process improvements. Simply claiming that they need-the-cash-for-process-improvements is not sufficient. What is to prevent them from using the money to give everyone big raises and bonuses and a nice fancy new office, and big fancy new computers if they're going to continue to use paper and use the computers to access rickety old systems with terminal emulators? I'd love to deal with happy USCIS employees, but I'd love it even more if I had to deal efficient USCIS employees. (Give them the tools and they'll be happier!)
Be careful with point 3 lawyers will not be happy.
You can add
6. Stop using Commodore 64 for processing applications. Move to something called Doors ... sorry Windows;)
USCIS is asking for comments....If IV would be so kind as to submit comments for the raising of the fees. I humbly throw these out for discussion:
Accept the fee increases providing:
1) That USCIS propose public standards of reducing processing times to 30 days+10 day security check.. Automatically produce an EAD if it takes longer. Hey. We're all still in the country whether the process succeeds or not right? We would just appeal, submit more info or beat it until it's done. Who's any safer?
2) That RFEs not be used to manage work levels. Plus they ought not to reset the 90 day clock to zero if they issue one. That is ridiculous and unheard of.
3) That they simplifiy applications (a la Canada) so that "lay persons" can (carefully) fill in the forms. Lawyers not required.
4) That the USCIS abide by the laws. Especially regarding FBI name checking. We have a duty to follow the law. I'm careful to do so. The government should be careful to do so as well.. Call me a radical.
5) That they publish proposals to stream line the process with modern business methods and concrete goals. The increases should be tied to fulfilling stated goals of improvements of service. Otherwise they roll back. Have a 3rd (independent) party decide if the goals have been met in three years.
If we tax payers are giving them extraordinary increases in fees, we should at least expect some meaningful process improvements. Simply claiming that they need-the-cash-for-process-improvements is not sufficient. What is to prevent them from using the money to give everyone big raises and bonuses and a nice fancy new office, and big fancy new computers if they're going to continue to use paper and use the computers to access rickety old systems with terminal emulators? I'd love to deal with happy USCIS employees, but I'd love it even more if I had to deal efficient USCIS employees. (Give them the tools and they'll be happier!)
Be careful with point 3 lawyers will not be happy.
You can add
6. Stop using Commodore 64 for processing applications. Move to something called Doors ... sorry Windows;)
more...
abhijitp
08-28 06:21 PM
Here is the thread where you can request accomodation.
http://immigrationvoice.org/forum/showthread.php?t=12565
I'll shoot you an email.
I too am receiving a lot of these questions on about pick-ups/ drop-offs. Can you please start a thread for that purpose?
Some people will be arriving on the day of rally and returning right after the rally. If something can be done to pick them up/ drop them off, please let us know. Thanks!
http://immigrationvoice.org/forum/showthread.php?t=12565
I'll shoot you an email.
I too am receiving a lot of these questions on about pick-ups/ drop-offs. Can you please start a thread for that purpose?
Some people will be arriving on the day of rally and returning right after the rally. If something can be done to pick them up/ drop them off, please let us know. Thanks!
2010 Another Full Metal Alchemist
veni001
09-07 10:13 AM
I have 14 years of education in india and 20 years of experience in IT - if my job requirement says bachelors equivalent + 10 years experience will it qualify me and job as EB2 ?
AS long as the requirements are standard across the board(industry) other wise DOL will request to prove the business necessity through audit. :o
AS long as the requirements are standard across the board(industry) other wise DOL will request to prove the business necessity through audit. :o
more...
qtoask
07-06 03:43 PM
Members: can you request IV to endorse this ... more than 100 people are waiting to get hear 'YES' from core...
http://immigrationvoice.org/forum/showthread.php?t=6025
thank you
http://immigrationvoice.org/forum/showthread.php?t=6025
thank you
hair Fullmetal Alchemist Wallpaper
leo2606
08-07 11:59 PM
I would suggest to marry a girl who is in USA with EB3-I 2007 or later PD, that way your marriage problem will be solved and you are helping a poor sole.
Just kidding man... don't make me communist by giving REDs. :)
Even if I back date my marriage (as advised) , How can I get my future wife to USA?. I cannot get her on depend status as my H1-B (I believe) got canceled on approval of GC.
Issues I see,
1. The back date of marriage must match to my stay at India.
2. I did not visit India in the last one year.
3. I applied my I-485 in the August 2008 time. So (I must mention my marriage and dependents in the application). Which I did not . So this does not work.
See the troubles I have now.
P.S: I did not want to cheat USA Immigration Dept. Not a good practice
Let me know if there are any guanine ways.
Just kidding man... don't make me communist by giving REDs. :)
Even if I back date my marriage (as advised) , How can I get my future wife to USA?. I cannot get her on depend status as my H1-B (I believe) got canceled on approval of GC.
Issues I see,
1. The back date of marriage must match to my stay at India.
2. I did not visit India in the last one year.
3. I applied my I-485 in the August 2008 time. So (I must mention my marriage and dependents in the application). Which I did not . So this does not work.
See the troubles I have now.
P.S: I did not want to cheat USA Immigration Dept. Not a good practice
Let me know if there are any guanine ways.
more...
rvr_jcop
02-13 12:58 PM
I filed my 485 in June 2007 in Nebraska and yesterday my LUD changed but there was no message. This is the first change in my LUD since my finger printing in July 2007. I am EB3-I with PD of Dec 2002. Not sure what got updated. Any ideas???
I've got LUD on mine and my wife's 485 on 02/10/2009. So far I got nothing, RFE or finger prints. My previous LUD on 11/26/2007.
Also, I applied for AP and I had LUD on 02/09. So I wasnt sure if they just checking for 485 before approving my AP>
I've got LUD on mine and my wife's 485 on 02/10/2009. So far I got nothing, RFE or finger prints. My previous LUD on 11/26/2007.
Also, I applied for AP and I had LUD on 02/09. So I wasnt sure if they just checking for 485 before approving my AP>
hot ~The Fullmetal Alchemist
wandmaker
04-21 01:46 PM
I understand that ... but I have seen the diploma accepted and the 2+3 accepted but of course nothing accepted by an adjudicator (or several) is binding. It is a tricky case. In a case like this EB3 skilled worker with 3 years of experience is always the best route to go and then once approved they can try for EB2.
The OP filed 140 as EB3 - USCIS has denied the 140 stating that the Diploma is not equivalent to US Bachelors Degree.
The only thing I see in the education is that s/he studied for 16 years, which does not provide privilege of claiming that his/her study is equivalent to US Bachelors. To be precise, 10 (School) + 2 (School) + 1 (First Year of B.Com) + 3 (XYZ Diploma) - The final certificate awarded is a DIPLOMA so OPs' education is not even equivalent to Indian B.Sc/B.Com.
In my opinion, s/he has to start from scratch and word the labor properly. Meanwhile, filing MTR / appeal can help - if one is in the last year of 6 year limit.
The OP filed 140 as EB3 - USCIS has denied the 140 stating that the Diploma is not equivalent to US Bachelors Degree.
The only thing I see in the education is that s/he studied for 16 years, which does not provide privilege of claiming that his/her study is equivalent to US Bachelors. To be precise, 10 (School) + 2 (School) + 1 (First Year of B.Com) + 3 (XYZ Diploma) - The final certificate awarded is a DIPLOMA so OPs' education is not even equivalent to Indian B.Sc/B.Com.
In my opinion, s/he has to start from scratch and word the labor properly. Meanwhile, filing MTR / appeal can help - if one is in the last year of 6 year limit.
more...
house Fullmetal Alchemist
anilsal
12-21 11:50 PM
All the Junior members. You asked your question and made yourself known.
Can I ask a simple question? Have you contributed or planning to do? Even a simple $20 contribution will go a long way in helping IV(I know you are capable of contributing in excess of $20 because you earn well). Don't be shy. Use Paypal.
Can I ask a simple question? Have you contributed or planning to do? Even a simple $20 contribution will go a long way in helping IV(I know you are capable of contributing in excess of $20 because you earn well). Don't be shy. Use Paypal.
tattoo Fullmetal Alchemist Anime
actaccord
01-31 08:56 AM
to find anything related to the patent in uspto.gov
Ms Su of TVU....why would someone stoop so low and looks like she became a convenient scapegoat for the students ..? not sure what'd you think. She has a Phd from UC Berkley and a patent on her name ....several publications.
I dug up her resume...
Dr. Susan Xiao-Ping Su
President of Tri-Valley University
Tri-Valley University TVU (http://trivalleyuniversity.org)
E-mail: ssu@trivalleyuniversity.org, su123@sbcglobal.net
EDUCATION
Ph .D. Department of Mechanical Engineering, University of California at Berkeley, 2001.
Major: Design; Minor I: Microscale Heat Transfer; Minor II: Integrated Circuit Technology.
Dissertation: Compliant Microleverage Mechanism Design for MEMS Application
Dissertation Advisors: Prof. Alice M. Agogino; Prof. Tsu-Jae King, Prof. Dennise K. Lieu
M. S. Department of Mechanical and Aeronautical Engineering, University of California at Davis, 1997. Major: Design
Thesis: Computer-Aided Kinematic and Dynamic Analysis of Spatial Mechanisms
Thesis Advisors: Prof. Harry H. Cheng; Prof. Bahram Ravani; Prof. An T. Yang (Emeritus)
B. S. Department of Engineering Mechanics, Tsinghua University, China, 1991.
Major Field of Study: Fluid Mechanics
WORK EXPERIENCE
1. President and Founder, Semiconductor System Integration, Pleasanton, 2003-present
� Consultant for Phosistor Technology, Pleasanton, on Semiconductor Device Fabrication, Development of photonic component (laser and OPM) process, Oxford Plasmalab DRIE and ICP etching of SiO2 for Optical MEMS devices.
� Consultant for California Micro Device on Chip-Scale-Packaging strengthen mechanism;
� Consultant for NASA on nano chemical sensor fabrication.
� High-density Magnetic Random Access Memory Development
2. Lecturer, HerGuan University, Sunnyvale, 2007
EE537 Analog IC Design, EE515 & 516 VLSI I & II
3. Lecturer, San Jose State University, San Jose, CA, Fall 2004-2006
EE178 Digital System Design with FPGA, ME 101 Dynamic
4. Lecturer, San Francisco State University, San Francisco, CA, 2004-2005;
ENGR 890 Design of MEMS; Design of CMOS Memory Circuit
ENGR 356 Computer Architecture; ENGR378 Digital System Design with Verilog.
5. Lecturer, International Technological University, Santa Clara, CA, 2004-2007
EEN967 Analog IC Design; EE 519 CMOS Memory Circuit Design; EE 511 VlSI I, II;
EEN 923 & 910 Semiconductor Physics & Devices; EEN 918 IC Fabrication Technology.
6. Lecturer, Northwestern Polytechnic University, Fremont, CA, 9/2002 -2004
EE 507 Analog IC Design; EE 520 CMOS Memory Circuit Design;
EE 506 VLSI II; EE 624 IC Fabrication Technology; EE 581 MEMS/NEMS Design;
Developing MEMS and nanotechnology concentration area curriculum.
7. Member of Technical Staff, Project manager, PicoNetics Inc., Fremont, 9/2000-9/2002.
� 256K 100MHz (TSMC 0.25m) and 4M 200MHz SRAM design (0.13m G logic process); RLC circuit for on-chip sin wave generation, sense amplifier fro SRAM, DRAM, Bandgap reference, voltage regulator, PLL circuit design, standard cell library design.
� Supervision of two layout engineers for a 256K SRAM circuit including all technical file set-up, layout optimization for minimum coupling and RC delay, Dracula LVS and Arcadia extraction, LVS and Extraction tools evaluation and memory compliers; UMC and TSMC 0.25, 0.18, 0.15 and 0.13 m process evaluation for SRAM.
8. Graduate Researcher, Berkeley Sensor and Actuator Center (BSAC), and Berkeley Expert Technology System Lab (BEST), U. C. Berkeley, 1996-2000.
� Design, fabrication and testing of a resonant accelerometer (RXL) with on-chip amplifier and two-stage leverage mechanism by the SOI-MEMS integrated process.
� Compliant micro-leverage mechanism design and analysis, FEM analysis and simulation with ABAQUS and SUGAR; Design of the mechanism for force and displacement amplification in other MEMS devices including a micro-valve, an electrostatic actuator and the suspension of the disk drive.
9. Internship, Lawrence Berkeley National Lab, EETD, 6/1999-12/1999.
� Optics programming; SEM and TEM measurements of glass samples.
10. Graduate Researcher, Integrated Engineering and Mechatronics Lab, Dept. of Mechanical and Aeronautical Engineering, UC Davis, 1994-1996
� With Ch program, analysis of velocity and acceleration for 32 spatial mechanisms (4-bar, 5-bar, 6-bar and 7-bar); force and torque analysis of RCCC & RCRCR mechanisms;
� Designed a data acquisition system for PAS machine by communication of an AT-MIO-16F board in Labview.
GRADUATE THESIS ADVISING:
� Yaosong Tao, International Technological University, Ph.D. Thesis: RF MEMS Components for Communication Systems, 2004.
� Leo Huang, Northwestern Polytechnic University, M.S. Thesis, Contacting Printing Lithography for Polymeric Organic Light-Emitting Diode, 2005;
� Sam Shi, International Technological University, M.S. Thesis, A 8-bit Energy Recover Adder, 2005;
� Parthiv Pandya, International Technological University, M.S. Thesis: MRAM Core Cell Design and Optimization, 2004;
� Paisit Sriprataks, International Technological University, M.S. Thesis: MRAM Sensing Circuit Design, 2004;
� Balajee Premraj, International Technological University, M.S. Thesis: Design of an 8M MRAM, 2004;
� Raul Gali, Northwestern Polytechnic University, M.S. Thesis: Signal Process Circuit Design for a Resonant Accelerometer, 2003;
AWARDS and HONORS
� John H. Latoures Scholarship, Mechanical Engineering Department,U.C. Berkeley, 2001.
� Lankershim Awards, U.C. Berkeley, 2000
� National Science Foundation (NSF) Graduate Research Fellowship (1996-1999);
� American Associated University Woman (AAUW) Selected Professional Fellowship ,1995;
� University Fee Grant, UC Davis, 1994.
PUBLICATIONS
1. S. X. P. Su, H. S. Yang, Alice M Agogino, Resonant Accelerometer with a Two-Stage Microleverage Mechanism Fabricated by SOI-MEMS Technology, IEEE Sensors Journal, Vol.5, No.6 December 2005, p.1214-1223
2. An Sang Hou, Susan X. P. Su, Design of a Capacitive-Sensor Signal Processing System with High Accuracy and Short Conversion Time, Sensors and Actuators A: Physical, Volume 119, Issue 1, 28 March 2005, P.113-119
3. X-P S. Su, H. S. Yang, Analytical Modeling and FEM Simulation of Single-Stage Microleverage Mechanism, International Journal of Mechanical Sciences 44, 2217-2238, 2002.
4. X-P. S. Su, H. S. Yang, Two-Stage Microleverage Mechanism Optimization in a Resonant Accelerometer, Structural and Multidisciplinary Optimization 22, 328-336, 2002.
5. X-P S. Su, H. S. Yang, Design of Compliant Microleverage Mechanism, Sensors and Actuators, A 87 146-156, 2001.
6. X-P S. Su, H. S. Yang, Single-Stage Microleverage Mechanism Optimization in a Resonant Accelerometer, Structural and Multidisciplinary Optimization 21, 246-252, 2001
7. H. S. Yang, X-P S. Su and B. Bai, Strain Analysis in Uniaxial Tensile and Compression Testing of Anisotropic Materials, International Journal of Mechanical Sciences 42 (2000) 2395-2415.
PATENTS
1. Susan X. P. Su, �A Folded-MTJ MRAM Cell� U.S. Patent No. US60/994941, 2007
Ms Su of TVU....why would someone stoop so low and looks like she became a convenient scapegoat for the students ..? not sure what'd you think. She has a Phd from UC Berkley and a patent on her name ....several publications.
I dug up her resume...
Dr. Susan Xiao-Ping Su
President of Tri-Valley University
Tri-Valley University TVU (http://trivalleyuniversity.org)
E-mail: ssu@trivalleyuniversity.org, su123@sbcglobal.net
EDUCATION
Ph .D. Department of Mechanical Engineering, University of California at Berkeley, 2001.
Major: Design; Minor I: Microscale Heat Transfer; Minor II: Integrated Circuit Technology.
Dissertation: Compliant Microleverage Mechanism Design for MEMS Application
Dissertation Advisors: Prof. Alice M. Agogino; Prof. Tsu-Jae King, Prof. Dennise K. Lieu
M. S. Department of Mechanical and Aeronautical Engineering, University of California at Davis, 1997. Major: Design
Thesis: Computer-Aided Kinematic and Dynamic Analysis of Spatial Mechanisms
Thesis Advisors: Prof. Harry H. Cheng; Prof. Bahram Ravani; Prof. An T. Yang (Emeritus)
B. S. Department of Engineering Mechanics, Tsinghua University, China, 1991.
Major Field of Study: Fluid Mechanics
WORK EXPERIENCE
1. President and Founder, Semiconductor System Integration, Pleasanton, 2003-present
� Consultant for Phosistor Technology, Pleasanton, on Semiconductor Device Fabrication, Development of photonic component (laser and OPM) process, Oxford Plasmalab DRIE and ICP etching of SiO2 for Optical MEMS devices.
� Consultant for California Micro Device on Chip-Scale-Packaging strengthen mechanism;
� Consultant for NASA on nano chemical sensor fabrication.
� High-density Magnetic Random Access Memory Development
2. Lecturer, HerGuan University, Sunnyvale, 2007
EE537 Analog IC Design, EE515 & 516 VLSI I & II
3. Lecturer, San Jose State University, San Jose, CA, Fall 2004-2006
EE178 Digital System Design with FPGA, ME 101 Dynamic
4. Lecturer, San Francisco State University, San Francisco, CA, 2004-2005;
ENGR 890 Design of MEMS; Design of CMOS Memory Circuit
ENGR 356 Computer Architecture; ENGR378 Digital System Design with Verilog.
5. Lecturer, International Technological University, Santa Clara, CA, 2004-2007
EEN967 Analog IC Design; EE 519 CMOS Memory Circuit Design; EE 511 VlSI I, II;
EEN 923 & 910 Semiconductor Physics & Devices; EEN 918 IC Fabrication Technology.
6. Lecturer, Northwestern Polytechnic University, Fremont, CA, 9/2002 -2004
EE 507 Analog IC Design; EE 520 CMOS Memory Circuit Design;
EE 506 VLSI II; EE 624 IC Fabrication Technology; EE 581 MEMS/NEMS Design;
Developing MEMS and nanotechnology concentration area curriculum.
7. Member of Technical Staff, Project manager, PicoNetics Inc., Fremont, 9/2000-9/2002.
� 256K 100MHz (TSMC 0.25m) and 4M 200MHz SRAM design (0.13m G logic process); RLC circuit for on-chip sin wave generation, sense amplifier fro SRAM, DRAM, Bandgap reference, voltage regulator, PLL circuit design, standard cell library design.
� Supervision of two layout engineers for a 256K SRAM circuit including all technical file set-up, layout optimization for minimum coupling and RC delay, Dracula LVS and Arcadia extraction, LVS and Extraction tools evaluation and memory compliers; UMC and TSMC 0.25, 0.18, 0.15 and 0.13 m process evaluation for SRAM.
8. Graduate Researcher, Berkeley Sensor and Actuator Center (BSAC), and Berkeley Expert Technology System Lab (BEST), U. C. Berkeley, 1996-2000.
� Design, fabrication and testing of a resonant accelerometer (RXL) with on-chip amplifier and two-stage leverage mechanism by the SOI-MEMS integrated process.
� Compliant micro-leverage mechanism design and analysis, FEM analysis and simulation with ABAQUS and SUGAR; Design of the mechanism for force and displacement amplification in other MEMS devices including a micro-valve, an electrostatic actuator and the suspension of the disk drive.
9. Internship, Lawrence Berkeley National Lab, EETD, 6/1999-12/1999.
� Optics programming; SEM and TEM measurements of glass samples.
10. Graduate Researcher, Integrated Engineering and Mechatronics Lab, Dept. of Mechanical and Aeronautical Engineering, UC Davis, 1994-1996
� With Ch program, analysis of velocity and acceleration for 32 spatial mechanisms (4-bar, 5-bar, 6-bar and 7-bar); force and torque analysis of RCCC & RCRCR mechanisms;
� Designed a data acquisition system for PAS machine by communication of an AT-MIO-16F board in Labview.
GRADUATE THESIS ADVISING:
� Yaosong Tao, International Technological University, Ph.D. Thesis: RF MEMS Components for Communication Systems, 2004.
� Leo Huang, Northwestern Polytechnic University, M.S. Thesis, Contacting Printing Lithography for Polymeric Organic Light-Emitting Diode, 2005;
� Sam Shi, International Technological University, M.S. Thesis, A 8-bit Energy Recover Adder, 2005;
� Parthiv Pandya, International Technological University, M.S. Thesis: MRAM Core Cell Design and Optimization, 2004;
� Paisit Sriprataks, International Technological University, M.S. Thesis: MRAM Sensing Circuit Design, 2004;
� Balajee Premraj, International Technological University, M.S. Thesis: Design of an 8M MRAM, 2004;
� Raul Gali, Northwestern Polytechnic University, M.S. Thesis: Signal Process Circuit Design for a Resonant Accelerometer, 2003;
AWARDS and HONORS
� John H. Latoures Scholarship, Mechanical Engineering Department,U.C. Berkeley, 2001.
� Lankershim Awards, U.C. Berkeley, 2000
� National Science Foundation (NSF) Graduate Research Fellowship (1996-1999);
� American Associated University Woman (AAUW) Selected Professional Fellowship ,1995;
� University Fee Grant, UC Davis, 1994.
PUBLICATIONS
1. S. X. P. Su, H. S. Yang, Alice M Agogino, Resonant Accelerometer with a Two-Stage Microleverage Mechanism Fabricated by SOI-MEMS Technology, IEEE Sensors Journal, Vol.5, No.6 December 2005, p.1214-1223
2. An Sang Hou, Susan X. P. Su, Design of a Capacitive-Sensor Signal Processing System with High Accuracy and Short Conversion Time, Sensors and Actuators A: Physical, Volume 119, Issue 1, 28 March 2005, P.113-119
3. X-P S. Su, H. S. Yang, Analytical Modeling and FEM Simulation of Single-Stage Microleverage Mechanism, International Journal of Mechanical Sciences 44, 2217-2238, 2002.
4. X-P. S. Su, H. S. Yang, Two-Stage Microleverage Mechanism Optimization in a Resonant Accelerometer, Structural and Multidisciplinary Optimization 22, 328-336, 2002.
5. X-P S. Su, H. S. Yang, Design of Compliant Microleverage Mechanism, Sensors and Actuators, A 87 146-156, 2001.
6. X-P S. Su, H. S. Yang, Single-Stage Microleverage Mechanism Optimization in a Resonant Accelerometer, Structural and Multidisciplinary Optimization 21, 246-252, 2001
7. H. S. Yang, X-P S. Su and B. Bai, Strain Analysis in Uniaxial Tensile and Compression Testing of Anisotropic Materials, International Journal of Mechanical Sciences 42 (2000) 2395-2415.
PATENTS
1. Susan X. P. Su, �A Folded-MTJ MRAM Cell� U.S. Patent No. US60/994941, 2007
more...
pictures Fullmetal Alchemist Background
_576x360.jpg "full metal alchemist wallpaper")
PDOCT05
08-15 03:22 PM
I have just called USCIS and spoke to very good and friendly lady IO. She has told me that in case if our applications is rejected for any reason due to lack of intial evidence,less amount of check or any other reason they will send a notice for re-submittal of application.
dresses is a resized wallpaper,
abhijitp
07-08 07:50 PM
http://www.youtube.com/watch?v=kEpN96P_1LA&NR=1
more...
makeup full metal alchemist wallpaper
NKR
02-13 09:28 AM
NKR, not sure if you heard about this one proverb... "jabh kismath GA***U hai tow kya karey ga PANDU"....we unfortunately get trapped with such type of employers who trouble their employees and learn lessons in hard way and looks like you haven't encountered any such experiences with your employer, if that's the case you are lucky enough & I wish you would NEVER fall into such employers hand who trouble for so many other different reasons....or not sure you should have one small experience and see how you feel just for the heck of it....
I can sit here and add as many proverb's here all day long but the point here is try to be supportive to folks who are seeking for some help rather then sharing your "KATARA" proverb's..grow up man!!
dude, that was not my proverb. I was replying to fearonlygod's post. I had only quoted him. anyways your proverb is funny and appropriate, had a good laugh.
I can sit here and add as many proverb's here all day long but the point here is try to be supportive to folks who are seeking for some help rather then sharing your "KATARA" proverb's..grow up man!!
dude, that was not my proverb. I was replying to fearonlygod's post. I had only quoted him. anyways your proverb is funny and appropriate, had a good laugh.
girlfriend full metal alchemist wallpaper
hydboy77
02-12 10:05 AM
DOS and USCIS are making sure no visas are being wasted in any category whether it is FB or EB category. In this situation we cannot expect any FB visa wastage and spillover of those FB wasted visa in EB category anymore. Without the FB spillover there will not be any forward movement in EB2 during the august-september visa bulletin. Mpadapa analysis seems to be correct and is also backed by facts and numbers. With only 140k visas for EB and without any FB spillover we might actually see dates moving back and staying stagnant for EB2 india. Remember Eb2 india has never managed to move beyond April 1 2004 without the FB spillover in the last quarter.This is a terrible shock to everybody in EB2 India, I have been saying this all along that EB2 will be stagnant or move backward (because of eb3 line cutters).
My document uses similar method as used in 2007 USCIS Ombudsman report.
Here is the link to my document - link (http://spreadsheets.google.com/ccc?key=p_liYSUcqZRXA9OjuWUNRag&hl=en)
Similar table can be found in Ombudsman report - link (http://www.aila.org/content/fileviewer.aspx?docid=22650&linkid=162315) Look at Page 34 ( 52 / 145 )
The numbers in my report would be off by < +/- 50 visa's because I am using published data and Ombudsman uses internal DOS data.
The bottom line is EB limit has enjoyed spillover from unused FB visas and this year it is not going to happen. In the past we have been used to EB limits of 154K (2007), 163K (2008), this year we have to get used to the original limit 140K The movement of PD of various categories would take their own coarse based on USCIS interpretation of spillover between categories.
It would be great if members can update their profiles so that IV can do a better job of estimating the forward movement using the tracker.
My document uses similar method as used in 2007 USCIS Ombudsman report.
Here is the link to my document - link (http://spreadsheets.google.com/ccc?key=p_liYSUcqZRXA9OjuWUNRag&hl=en)
Similar table can be found in Ombudsman report - link (http://www.aila.org/content/fileviewer.aspx?docid=22650&linkid=162315) Look at Page 34 ( 52 / 145 )
The numbers in my report would be off by < +/- 50 visa's because I am using published data and Ombudsman uses internal DOS data.
The bottom line is EB limit has enjoyed spillover from unused FB visas and this year it is not going to happen. In the past we have been used to EB limits of 154K (2007), 163K (2008), this year we have to get used to the original limit 140K The movement of PD of various categories would take their own coarse based on USCIS interpretation of spillover between categories.
It would be great if members can update their profiles so that IV can do a better job of estimating the forward movement using the tracker.
hairstyles full metal alchemist wallpaper
rajuram
01-03 12:17 PM
Does PMP offer any advantages in terms of promotions or getting a new job? Please share your experience.
eb3_nepa
12-04 08:06 PM
I'll belive it when i actually SEE it happen. Rediff and TOI report all sorts of stuff that is sometimes far from the truth. Remember when the bill was introduced in senate and was being debated, they published that the H1B increase bill has been passed! Let us get official word that this has happened and we can be happy after that.
mpadapa
03-18 09:58 AM
http://immigrationvoice.org/forum/showpost.php?p=231163&postcount=914
Thank you everyone for sending letters. We are now in Phase 2 of the campaign.
State chapter leaders have been informed of the update. Please get in touch with your state chapter groups for more regular updates on the Admin Fixes campaign. More updates will be given by the chapter leaders as we make progress in the Admin fixes campaign.
If you do not have a state chapter, please join a state chapter near your state.
Thank you everyone for sending letters. We are now in Phase 2 of the campaign.
State chapter leaders have been informed of the update. Please get in touch with your state chapter groups for more regular updates on the Admin Fixes campaign. More updates will be given by the chapter leaders as we make progress in the Admin fixes campaign.
If you do not have a state chapter, please join a state chapter near your state.